after you paste it into Loop Analyzer, and (2)
the data is in percent, so set "Controller LRV" to 0 and
"Controller URV" to 100 in PID Loop Analyzer.Navigate to a point’s detail page and select its “Loop Tune”
tab. Perform an open loop bump
test. With the test data visible in the
trend display, click the chart to select it. Then press Ctrl C (copy) to capture the data; open notepad and press
Ctrl V (paste). You now have your bump test
data in TSV format, ready to paste into PID Loop Analyzer. Note two anomalies, however: (1) the data is
in reverse order, so press the “reverse data” button after you paste it into Loop Analyzer, and (2)
the data is in percent, so set "Controller LRV" to 0 and
"Controller URV" to 100 in PID Loop Analyzer.